Application of silicone conductive strips on bicycle speedometers

As an important auxiliary tool for cyclists, bicycle computers often encounter some problems. Here are some common problems with bicycle computers and their solutions:

Common Problems and Solutions

The bicycle speedometer does not display or displays abnormally

• Problem and Cause：

Battery drain, display malfunction, connection issues, etc.。

• Solution：
  • Check the battery level and replace it with a new one in time。
  • Check the display to see if it is damaged or incomplete. If necessary, contact the manufacturer or after-sales service for repair or replacement.。
  • If the computer is connected to the sensor via a wireless connection, make sure the connection is working properly and check the battery level and connection status of the sensor.。

2.Speed or distance displayed is inaccurate

• Problem and Cause：

Sensor failure, incorrect wheel diameter setting, etc.

• Solution：
  • Check whether the sensor is installed correctly, loose or damaged, and replace it with a new one if necessary.。
  • According to the actual size of the bicycle tire, correctly set the wheel diameter of the computer to ensure the accuracy of speed and distance calculation。

3.Unable to receive speed data

• Problem and Cause：

Signal interference, receiver failure, etc.

• Solution：
  • Make sure the receiver is working properly and is paired with the computer successfully.
  • Check for signal interference, such as other wireless devices or obstacles. Try adjusting the position of the receiver or sensor.

4.Setting Problems

• Problem and Cause：

The computer settings are incorrect, resulting in the function not working properly.

Solution：

• Read the instruction manual of the computer carefully to make sure all settings are correct.
• According to your personal riding needs, select the corresponding riding mode, such as road mode, mountain mode, etc.

5.Bicycle speedometer cannot be turned on

• Problem and Cause：

Improper battery installation, battery exhaustion, power button failure, etc.

• Solution：
  • Check if the battery is installed correctly and the battery polarity is correct。
  • Try replacing the battery with a new one。
  • If the battery is installed correctly and has sufficient power, but the computer still cannot be turned on, it may be that the power button is faulty and you need to contact the manufacturer or after-sales service for repair.。

1. Data synchronization or sharing issues
   • Problem and Cause：

Bluetooth or Wi-Fi connection issues, third-party app compatibility issues, etc.

• Solution：
  • o Make sure the Bluetooth or Wi-Fi function of your computer is turned on, and the Bluetooth or Wi-Fi function of your mobile phone or other device is also turned on.
  • Try to pair or connect the computer and mobile phone again.

O Check whether the third-party app supports the data synchronization and sharing functions of the computer. If necessary, update the app or contact the app developer for support.

Maintenance Recommendations

• Regularly check the battery level and sensor status of the computer, and replace the battery and repair faulty sensors in a timely manner.
• Avoid using the computer in extreme weather conditions to prevent damage to the computer.
• Read the instruction manual of the computer carefully to understand its functions and operation methods to avoid problems caused by incorrect operation.

If you encounter a problem that you cannot solve, contact the manufacturer of the bicycle computer or after-sales service in a timely manner for professional help and repair suggestions.

In addition, the silicone conductive zebra strip in the bicycle meter display plays a vital role. It is not only a key component connecting the internal circuit of the display with the external power supply or signal source, but also ensures the accurate transmission of data and the normal operation of the display. The following will elaborate on the application and importance of conductive rubber strips in bicycle meter displays.

Silicone conductive zebra strips have excellent conductive properties and can establish a reliable connection between the internal circuit of the display and the external circuit. This connection is the basis for the normal operation of the bicycle meter, ensuring the accurate display of riding data such as speed, distance, and time. The conductive performance of the conductive strip is achieved through the conductive particles or coating inside it, which form a conductive path when the strip is compressed or fitted, thereby transmitting electrical signals.

There are many types of silicone conductive zebra strips, such as YL type conductive strips, YP type conductive strips, YS type conductive strips, YI type conductive strips, MG type conductive strips, etc. Different types of conductive strips have different characteristics and applicable scenarios. When choosing a conductive strip, it is necessary to select it according to the specific needs and working environment of the bicycle meter display to ensure the best performance and connection stability of the conductive strip.

For more information, please contact: https://www.cmaisz.com/

Media Contact
Company Name: Shenzhen Changmai Technology Co., Ltd.
Email: Send Email
Phone: +86-755-28146220
Address:2003, LongGuang JiuZuan Building 5A,Tenglong Road, Hongshan, Longhua District
State: ShenZhen, 518038
Country: China
Website: https://www.cmaisz.com/